Sunday, April 7, 2019

Installation: Souvenirs of the Bay Area Housing Crisis


Installation in news stand, Oakland, CA

I don't know how people are faring in your part of the world, but here in the San Francisco Bay Area we have an acute housing crisis, with locals being pushed out and homeless camps growing larger every day. Thus this little installation piece in an empty newsstand.

The first step was to create a living room suite. Regarding the dollhouse furniture, I've found you can learn to make anything if you Google it and believe you can.

Creating a little living room suite

The "rug" is from a fabric sample book, the lampshade is from a wallpaper sample book, the table is driftwood. The lamp base is a tiny urn and the table below is a circle of scrap wood atop an old spool of thread. The base supports for table, chair and couch are beads from a sandlewood necklace. The pillows are stuffed with sand so that they have weight and slump more naturally atop the furniture.

Chair

Couch

Lamp

Battery-operated tea light inside of lamp

Driftwood table

I am aware that once installed, this piece will probably be picked apart in short order. I decided to go with the flow on the spontaneous destruction of the piece by the viewing public, and placed a label under every piece of furniture and even the rug, so that the take-away carries a little message.


I also made a  real estate promo sign for the top of the newsstand.

Promo sign for top of news stand


The Installation:

The newsstand I picked is one not yet obscured by graffiti on the front plastic panel, located in a heavily trafficked neighborhood on Lakeshore Avenue in Oakland, right in front of Peets and across the street from Arizmendi. This SF Weekly newsstand is stocked every Thursday, but is usually out of papers by Friday afternoon, leaving it temptingly empty and ready for action the rest of the week.

The newsstand in an ideal location

Installation complete

A view through the front window

With the door open

Close-up

And when we are done installing? Why we just walk away.

Thursday, April 4, 2019

Fused Plastic Chinese Lantern Restoration


Antique lantern with fused plastic panels

Welcome back to what is apparently a lifelong project: creative restoration of an antique Chinese lantern. To see and read more about earlier versions of this lantern, see Chinese Lantern Backstory. To see a range of pieces I've done by ironing recycled plastic bags together, see Fused Plastic.

Originally pieced together from a crate of broken pieces salvaged from an Asian arts store, the lantern is delicate and a bit rickety. This is the third time since I've owned it that I have had to replace all of the panels. The panels from the last rendition, also fused plastic, had faded from vivid colors to a dull milky white.  Below, the repair begins. You can see the old, faded panels still on the lantern.

Under repair
The next series of photos offer a revolving view of the latest restoration and the new fused plastic panels.

Restored - View A

Restored - View B

Restored - View C

Restored - View D

At this point, you may be sated and should feel free to wander away. For those intrigued by what you can do by fusing plastic bags together with a little judiciously applied heat from your iron, stick around. Below are details of each of the panels.

Bottom 1

Bottom 2

Bottom 3

Bottom 4

Bottom 5
And here are some top panel details.

Top panel 1

Top panel 2

Top panel 3

Top panel 4

Add caption

For those who have waded through all of these images, here is a quickie, dead-simple tutorial on making your own fused plastic:

1. Collect colorful, interesting plastic bags, plastic wrappings, plastic whatever. But save the plain plastic too; you'll need it for your bottom layers.

2. You will need a minimum of four layers of plastic for the panel to have any strength. Throw extra decorations on top.

3. Set iron to fairly high, no steam. 

4. Lay out a plain sheet of paper on your work table.  Assemble your plastic panel on that sheet of paper. Lay another plain sheet of paper on top. Iron, pressing firmly. How long? I don't know - hum to yourself for a while.

5. When done, peel away the top and bottom layers of plain paper. Sometimes the plastic sticks to the paper. If so, pat it back down and iron a little more. Sometimes the paper sticks to the plastic and tears away. If so, take the plastic to the sink and use water and your fingers to rub away the paper.

And if I am still around in seven years, you will get to see an entirely new rendition of this lantern.




















Related Posts with Thumbnails